P11/P12 Quarter Turn Actuators

The P11/P12 family of electric actuators are designed for load requirements ranging from 26,500 inch pounds up to 31,000 inch pounds. The actuator comes standard with two auxiliary switches (form C), an internal low power heater, a NEMA 4X environmental rating, and in 120VAC, 230VAC 3 Phase, 380 VAC 3 Phase, and 480 VAC 3 phase supply voltages. The P11/P12 family mechanical connections are ISO 5211 compliant. The P11/P12 Series can be ordered as an on/off (two position) model that can be used in bump/jog applications as well. Models can also be ordered with an internal proportional control card that accepts a wide range of control signals and generates multiple feedback signals for field use.

 

REQUEST MORE INFO

Description

SD15_P1112_HV Ver N_100915

IOMs

IOM P11/12 120V ISO & IMP NEMA 4/4X (TORQUE SWITCH)(IP68)(STAINLESS STEEL) WIRELESS

IOM P11/12 HV MODULATING NEMA 4/4X HIGH RESOLUTION ISO FEEDBACK (TORQUE SWITCH)

IOM P11/12 HV MODULATING NEMA 4/4X

IOM P11/12 ISO & IMP HV MODULATING NEMA 4/4X HIGH RESOLUTION (TORQUE SWITCH)IP68)(STAINLESS STEEL)

IOM P11/12 ISO & IMP HV MODULATING NEMA 4/4X (TORQUE SWITCH)IP68)(STAINLESS STEEL)

IOM P11/12 HV NEMA 4/4X TORQUE SWITCH

IOM P11/12 HV NEMA 4/4X RELAY OPEN

IOM P11/12 HV MODULATING NEMA 4/4X

 

 

 

CAD & Dimensional Data

DIM DATA P11/12 F16 R75

Wiring Diagrams

WD-850-25S01 NORMALLY CLOSED (RELAY TO OPEN) 120 VAC/24VDC CONTROL P2-13 USE FOR P2-13-120N4-SCADA-NC

WD-850-00100 HV AC (TORQUE SWITCH) USE FOR P2-P13 HV N4/N7-TS

WD-850-00200 HV AC MODULATING USE FOR P2-P13 120/230PN4

WD-850-34501 120VAC NORMALLY CLOSED (RELAY TO OPEN) USE FOR P2-P13 120N4-RO

WD-850-34502 G 120VAC NORMALLY OPEN (RELAY TO CLOSE) USE FOR P2-P13-120N4-RC

WD-850-P4S01F NON LINE VOLTAGE OPEN/CLOSE CONTROL 120/230VAC USE FOR DUAL RELAY P2-P13 DR SCADA

WD-858-08282 MOTOR CONTROL CENTER AND LCS INCLUDED 480/3/60 PROPORTIONAL CONTROL USE FOR P2-P13-480/3/60 PN4-MCC

WD-858-09100 MOTOR CONTROL CENTER 480/3/60 (TORQUE SWITCH) USE FOR P2-P13 ALL/3/60 MCC-(TS)

WD-850-24161 120VAC W/ 4-20mA FEEDBACK USE FOR P2-13-120N4 W/4-20mA FB

WD-850-34502F 120VAC NORMALLY OPEN (RELAY TO CLOSE) USE FOR P2-P13-120N4-RC

WD-850-O4N00 120VAC WIRELESS OPEN CLOSE SWITCHING USE FOR P2-P13-120N4-WL

WD-850-O4601 120VAC PROFIBUS USE FOR P2-P13-120PFB-N4

WD-850-O42821 120 VAC PROPORTIONAL MODBUS CONTROL USE FOR P2-P13-120PN4-MODBUS

WD-850-OO101 B LV HV (+ACDC)(TORQUE SWITCH) USE FOR P2-P13-24/120/230N4/N7(+ACDC)-TS

WD-850-OO501 HV VAC OSCILLATING SINGLE WIRE ACTIVATION USE FOR P2-P13_WHI_HV OSCILLATION

WD-850-OO10101 NORMALLY CLOSED (RELAY TO OPEN) 120VAC/24VDC CONTROL USE FOR P2-P13-120N4-24VDC RO

WD-850-P4S01G NON-LINE VOLTAGE AND CONTROL FOR HV USE FOR DUAL RELAY P2-P13 DR SCADA

WD-850-P4S03DRFB NON LINE VOLTAGE OPEN/CLOSE CONTROL FOR HV DUAL RELAY USE FOR OPT-DR-P2-P13-W/4-20FB

WD-850-P4161 120VAC W/ 4-20mA FEEDBACK USE FOR P2-P13-120N4 W/4-20mA FB

WD-850-P4222F 120VAC HIGH RESOLUTION PROPORTIONAL CONTROL USE FOR P2-P13-120PN4-HR

WD-850-P4522 HV VAC NORMALLY OPEN (RELAY CLOSE) LI TIMER USE FOR P2-P13-120/230N4-RC-LI

WD-858-09101 MOTOR CONTROL CENTER 480/3/60 (TORQUE SWITCH USE FOR P2-P13 ALL/3/60 MCC-(TS)

WD-858-28282H MOTOR CONTROL CENTER 480/3/60 LCS INCLUDED PROPORTIONAL CONTROL USE FOR P2-P13-480/3/60 PN4-MCC

WD-858-28286A MOTOR CONTROL CENTER 480/3/60 LCS INCLUDED WITH PROPORTIONAL CONTROL USE FOR P2-P13-48(6)0/3/60 PN4-MCC

WD-858-28290A MOTOR CONTROL STATION WITH LCS 480/3/60 PROPORTIONAL CONTROL WITH MODBUS USE WITH P2-P13-480/3/60 MN4-MCC

WD-858-28292C MOTOR CONTROL CENTER WITH LCS INCLUDED 480/3/60 NO EXTRA WIRING USE FOR P2-P13-480/3/60 MN4-MCC NO EXTRA WIRING

WD-850-54101 120VAC USE FOR P9-P13-120N4

WD-850-54201 120VAC MODULATING USE FOR P9-P13-120PN4

WD-850-94101 120VAC TORQUE SWITCH USE FOR P9-P13-120N4-TS

WD 840-04T03 A USE FOR P2-P13 WAIT TIMER CCW

Product Nomenclature

web product nomenclature

Product Family Matrix

Product Family Matrix Download

 

ProMation Product Matrix Final

PROMATION BROCHURE

ProMation Brochure Download

CUT SHEETS

CUT SHEET P11&P12